Hart To Modbus Tcp Gateway

Product Details:

GT200-HT-MT is a gateway that can exchange data between HART and Modbus TCP. HART interface can be configured as a primary master or a secondary master Modbus TCP side act as a slave.

Product Features:

• Simple to use users can refer to product manuals and application case to achieve communication in a short time according to the requirements of the configuration;
• A Ethernet 10/100M adaptive;
• Rich debugging features, the command of the subsection mapping function, the visual display of data exchange, HART slave command diagnostic functions greatly facilitate the user's communication test;
• With configuration software, it can configure the HART command and parameters of Modbus TCP Server.

Technical Specifications:

• HART interface can be used as a primary master or the secondary master;
• Supports one HART channel, supports connecting at most 13 ins.meMs with gateway internal resistor (270 0 /2W) and supports connecting 15 instruments with an external resistor (25001/2W);
• HART interface supports single-point and multi-point mode;
• Under single-point mod, supports data burst operation;
• Supports Al commands of the HART protocol;
• Each HART command can be configured for change-of-state output, poling output, initialization output or no output;
• Supports up to 100 HART commands, the output data buffer area can be up to 2000 bytes, and the input data buffer area up to 3000 bytes;
• Each channel can choose to use an internal or external HART sampling resistor;
• Supports IP address conflict detection and auto routing ,Modbus TCP slave supports at most 36 connection and 512 command request simultaneously;

Request
Callback