Product Details:
Minimum Order Quantity | 1 Piece |
Power Supply | 2-wire 20-30 V DC / 4-wire 24V DC |
Digital Communication | 4-wire RS485 / HART (optional) |
Housing Material | PBT/PP Wetted Part |
Display | LCD Plug-in display/keyboard |
Accuracy | +/-0.15 % (of the measured distance) not better than +/-3mm |
Blind Distance | 0.25m |
Relays Output | (4-wire only) -n 2 3A 230 V Ac |
Resolution | 1 mm |
Temperature Compensation | Digital from -30 to 80 Deg C |
Warm Up | 1 minute typical |
Working Temperature | 30 - +70 Deg C; +80 Deg C non-continuous |
Calibration | 4 buttons or by HART/RS485 |
Electrical Connection | Internal push actuators connectors |
Max Measure Range | Standard max 0.25-5m (In case of non perfectly reflecting surfaces,the max dist value will reduced) |
Mechanical Installation | 2" GAS M on request PP flange DN80 |
Power Consumption | 2-wire max 0,6W / 4-wire max 1,5W |
Pressure | From 0.5 to 1.5 bar (absolute) |
Protection Degree | IP65 |
We are engaged in fabrication of Ultrasonic Flow Meter that is used to take measurements of the level of liquids, where physical contact with liquid is not possible. The transmitter is designed with a blind zone of 0.25m close to the sensor, where at this point measuring capability of instrument lapses.
During the use of the equipment following points must be noted:
Avoid spurious echoes which are not reflected by the surface
Take care of the positioning of the METER sensor
No obstacles should interfere with the ultrasonic wave emission lobe
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | VISA |
Model Name/Number | TDS100H |
Flow Media Type | Water |
Flow Range | 100000 m3/hr |
Application Media | Water |
Display | Digital |
Additional Information: